Camloc Latches
Mechanical Attachment
Weld Attachment
| Description | Part No. | A REF. | B DIA. REF. | C REF. | Strike | Attachment Fastener | ||||
| 37L15 Series | 37L14 Series | Screw Size REF. | Rivet Dia. REF. | |||||||
| D TYP. | E TYP. | D TYP. | E TYP. | |||||||
| Tool Operated | 37L52-1-1AA | — | — | — | 2.86 | — | — | 2.30 | Weld | Weld |
| 37L52-1-2AA | ||||||||||
| 37L52-1-2BB | ||||||||||
| 37L52-2-2BB | ||||||||||
| Two-Position Draw Bolt, Short Length | 37L22-1-1AC | 2.86 See Note |
2.30 See Note |
|||||||
| 37L22-2-1AC | 1.000 | .250 | .875 | — | 4.24 See Note |
3.68 See Note |
— | 1/4 | 1/4 | |
| Secondary Lock | 37L33-1-1AA | 1.500 | .190 | 1.531 | 4.29 | 3.73 | 2.30 | No. 10 | 3/16 | |
| 37L33-1-1AB | ||||||||||
| 37L33-1-4AB | ||||||||||
| 37L33-4-1AB | 4.38 | 2.95 | ||||||||
| Two-Position Draw Bolt, Regular Length | 37L1-1 | — | — | — | 3.82 See Note |
— | — | 3.26 See Note |
Weld | Weld |
| 37L1-2 | ||||||||||
| 37L1-3 | ||||||||||
| 37L1-5C | ||||||||||
| Short Handle | 37L11-1 | 2.86 | — | — | 2.30 | |||||
| 37L11-2 | ||||||||||
| 37L11-1B | ||||||||||
| 37L11-7 | 3.42 | — | — | 2.86 | ||||||
| 37L11-8 | ||||||||||
| 37L25-1-1AA | 1.000 | .250 | .875 | — | 4.24 | 3.68 | — | 1/4 | 1/4 | |
Note: Dimension shown applies when drawbolt is assembled in the maximum mechanical advantage hole. Subtract .37 from the dimension if drawbolt is assembled in the maximum take-up hole.
Mechanical Attachment
- Locate latch and form 4 “B” Diameter holes.
- Attach latch with bolts or rivets (see table, not supplied).
- Locate strike as required and weld in place.
Weld Attachment
Locate latch and strike as required and weld in place. (See illustrations on following page for correct weld seams.)
