Select Page

CAPTIVE SCREWS

image

These retaining ring type of captive tensile loads through the screw screws bridge the gap between without
the usual compromise. conventional designs and high The retaining ring retention allows performance structural panel
for quick installation and removal fasteners. The elimination of housing with inexpensive hand tools allows direct
transfer of shear and minimizing maintainability problems.

image

RETAINING RING TYPE.

Configuration and Basic Part Number Head Styles Size Material Finish
P/N CA21062
Single Lead
image
Pan Head with Phillips Recess
6-32
8-32
10-32
300 Series CRES. Passivated per QQ-P-35.
P/N CA21063
Single Lead
image
Flush Head with Phillips Recess
6-32
8-32
10-32
300 Series CRES. Passivated per QQ-P-35.
P/N CA21088 6-32
Single Lead 8-32
10-32
300 Series CRES. Passivated per QQ-P-35.
Hex Head with Phillips Recess 1/4-28

image

image

image

image

image

Retaining Ring (Split). CA21062R

(To be used with Part Nos. CA21062, Typical 21062 Screw Installation Material: 17-7 PH CRES CA21063 and CA21088.) with
retaining ring and top Finish:

image

panel with counter bore to provide Passivated per QQ-P-35 retaining ring cavity.* *P/N CA21062R Retaining Ring is used
to captivate screw to panel. Washer (CA21062W) or spacer (CA21062S) shown below may be used as an alternate to
counterbore in the top panel or substructure to form the retaining ring cavity.

image

image

Installation Tool.

(For spliting retaining ring) Material: 17-4 CRES.

P/N CA21062T10

Finish: Glass Bead Blasted and Passivated per QQ-P-35 

image

OPTIONAL:

image

image

Spacer.

(Forms retaining ring cavity) Use of optional washer or spacer Material: 6061-T6

P/N CA21062S

provides necessary cavity for Aluminum Alloy retaining ring without Finish: Clear Iridite counterboring top or bottom
panel Convenient to use with gaskets.

image

Washer.

(Forms retaining ring cavity) Use of optional washer or spacer Material: 6061-T6

P/N CA21062W

provides necessary cavity for Aluminum Alloy retaining ring without Finish: Clear Iridite counterboring top or bottom
panel. Convenient to use with gaskets.

image

REQUEST A QUOTE