Delron InsertsD1834
Series — NAS 1834 Equivalent
Style Selection
Table 1
| Size | Clearance Hole Per AND10387 | A Head Dia. | B Dia. | C Dia. | J | L Min. |
| 06 | .140 | .560 | .300 | .280 | .367 | .250 |
| 08 | .169 | .560 | .300 | .332 | .367 | .250 |
| 3 | .196 | .560 | .300 | .385 | .367 | .250 |
| 4 | .257 | .685 | .375 | .507 | .467 | .312 |
| 5 | .316 | .685 | .475 | .625 | .467 | .312 |
| 6 | .377 | .841 | .500 | .750 | .591 | .375 |
Notes:
- Burrs caused by machining of potting holes or slots permissible under flange.
- Adhesive backed installation tab, D1837, shall be furnished with each insert. See page 44.
- Tolerances, unless otherwise specified: .xxx ± .010; Angles ± 2°.
Typical Assembly
Typical Series D1834 Clearance Hole Insert (NAS 1834 equivalent); installed in honeycomb sandwich panel. Insert is held
in place by a cured epoxy compound.
Note: For installation and tooling information, see pages 44 and 45.
Part Number Selection
Consult Rosán for availability of optional materials, finishes and sizes.
Example:
Part Number Example:
1.Requirements:
.250 Diameter Clearance Hole, Countersunk, Aluminum Alloy, and an overall panel thickness of .375 inch.
Part Number:
