Camloc Latches 106L Series
Description | Material | Part No. | Pawl Style | Mounting Method | |||
Stud | Bracket | Pawl | T-Bar | ||||
T-Bar Smooth Knob | Steel (Zinc Plated) | Steel (Zinc Plated) | Stainless Steel (Passivated) | Steel (Zinc Plated) | 106L01-2-1AA | Smooth | Rivet |
106L01-2-2AA | Serrated | ||||||
Steel (Black Phosphate, Oil Dip) | Steel (Black Phosphate, Oil Dip) | 106L01-2-1AD | Smooth | ||||
106L01-2-2AD | Serrated | ||||||
Stainless Steel (Passivated) | Stainless Steel (Passivated) | Stainless Steel (Passivated) | 106L01-2-1BC | Smooth | |||
106L01-2-2BC | Serrated | ||||||
Steel (Zinc Plated) | Steel (Flash Copper Plated) | Steel (Zinc Plated) | 106L01-2-3AB | Smooth | Weld | ||
106L01-2-4AB | Serrated | ||||||
Steel (Black Phosphate, Oil Dip) | Steel (Black Phosphate, Oil Dip) | 106L01-2-3AE | Smooth | ||||
106L01-2-4AE | Serrated | ||||||
Stainless Steel (Passivated) | Stainless Steel (Passivated) | Stainless Steel (Passivated) | 106L01-2-3BC | Smooth | |||
106L01-2-4BC | Serrated | ||||||
T-Bar Knurled Knob | Steel (Zinc Plated) | Steel (Zinc Plated) | Stainless Steel (Passivated) | Steel (Zinc Plated) | 106L01-5-1AA | Smooth | Rivet |
106L01-5-2AA | Serrated | ||||||
Steel (Black Phosphate, Oil Dip) | Steel (Black Phosphate, Oil Dip) | 106L01-5-1AD | Smooth | ||||
106L01-5-2AD | Serrated | ||||||
Stainless Steel (Passivated) | Stainless Steel (Passivated) | Stainless Steel (Passivated) | 106L01-5-1BC | Smooth | |||
106L01-5-2BC | Serrated | ||||||
Steel (Zinc Plated) | Steel (Flash Copper Plated) | Steel (Zinc Plated) | 106L01-5-3AB | Smooth | Weld | ||
106L01-5-4AB | Serrated | ||||||
Steel (Black Phosphate, Oil Dip) | Steel (Black Phosphate, Oil Dip) | 106L01-5-3AE | Smooth | ||||
106L01-5-4AE | Serrated | ||||||
Stainless Steel (Passivated) | Stainless Steel (Passivated) | Stainless Steel (Passivated) | 106L01-5-3BC | Smooth | |||
106L01-5-4BC | Serrated |
Mechanical Attachment
- Locate and form 2 holes .140 Dia. Ref. and clearance hole per table (see table and illustration).
- Pass knob through clearance hole from back side of panel.
- Attach with No. 6 screw or .125 diameter rivet (not supplied).
Note: Make sure tab of bracket faces toward frame (see illustration). - For T-Bar Versions, insert T-Bar through hole in knob after latch has been installed (T-Bar must be pressed into position and centered on knob).
Weld Attachment
- Locate and form clearance hole per table (see table and illustration).
- Pass knob through center hole from back side of panel.
- Locate latch as required and weld in place.
Note: Make sure tab of bracket faces toward frame (see illustration). - For T-Bar Versions, insert T-Bar through hole in knob after latch has been installed (T-Bar must be pressed into position and centered on knob).