Camloc Latches 20L Series
|Supplied With Holes For Mechanical Attachment||Steel (Zinc Plated)||20L02-1-1AA|
|Supplied With Weld Nibs||Steel (Oil Coated)||20L02-2-1AA|
Panel Preparation and Installation Data
Installation Using Strike
- Locate and form holes for latch and strike.
- Strike can be eliminated by slotting panel or hooking drawhook over an edge. (See Illustration)
- Adjust “B” or “C” dimension as applicable to obtain desired clamping load. Dimensions referenced typically allow latch to lock up with no clamping load applied.
- Attach latch with No. 12 bolts or 7/32 inch diameter rivets. Attach strike with No. 5 machine screws or 1/8 inch diameter rivets. (Fasteners are not supplied)
Locate latch and strike (see notes 1A and 1B above), and weld in place.
Installation in Slotted Panel or Over Edge
|Latch Style||Latch Assembly Part No.||A Ref.||B Typ.||C Typ.|
|Radiused Base||20L01-4-3AC||See Part Drawing||1.692||0.970|