Live Lock CA2000 Series Retaining Rings
![]()
Retaining Rings.
![]()
|
Material |
Part No. |
|
17-7PH CRES Heat Treat: Per MIL-H-6875 Finish: Passivated per QQ-P-35 |
CA2025 |
|
Same as CA2025 except Finish: Black Oxide per MIL-C-13924 |
CA2025B |
|
Same as CA2025 except Finish: Cadmium Plated per QQ-P-416, Type II , Class 2 |
CA2025C |
|
Material |
Part No. |
|
17-7PH CRES Heat Treat: Per MIL-H-6875 Finish: Passivated per QQ-P-35 |
CA2025 |
|
Same as CA2025 except Finish: Black Oxide per MIL-C-13924 |
CA2025B |
|
Same as CA2025 except Finish: Cadmium Plated per QQ-P-416, Type II , Class 2 |
CA2025C |
CA2025 Split Ring
Weight:
.0098 lbs. per hundred (approx.)
CA2035 Wire Form Ring
Material: Elgiloy Wire Heat Treat:
Stress relieved and spring tempered Finish:
Passivated per QQ-P-35
Weight:
.0062 per hundred (approx.)
Notes:
2
2
- Use CA2035 ring when through hole in substructure “T ” exceeds .218 diameter. See hole preparation on Pages 6 and 7.
-
IMPORTANT: Coined side of ring must face toward head of stud nut.
![]()
Installation Tool for CA2025 or CA2035 Retaining Rings
![]()
![]()
Shim.
![]()
CA2077
Typical Installation Showing Proper Use of Shim
Fairchild Fasteners
Note: Fifty (50) retaining rings are sold mounted on an installation tool to insure proper installation.
Material:
Aluminum per QQ-A-250
Finish:
Anodized per MIL-A-8625
Weight:
.0003 lbs. each (approx.)
Notes:
- For use with CA2010 or CA2010C receptacle if required.
- Shim is required when “G” Grip Range is less than min. grip of stud nut.