| Material/ Finish | Ultimate Load, lbs. | Weight, lbs. | A inches | B inches | Part Number |
| Shear Pin: 17-4PH CRES/Passivate Dry Film Lube Housing, Handle and Trigger: A356 -T61 Aluminum Alloy/Anodize Springs: Music Wire | 1,000 (454) Double Shear | 1.75 (.793) Max. | – | – | TL16015-101 |
| Shear Pin: 17-4PH CRES/Passivate Link, Handle, Side Plate, Trigger, and Pivot: 302- 304 CRES/Passivate Springs: 17-7PH CRES/Passivate | 585 (265) Single Shear 1,170 (531) Double Shear | .50 (.226) Max. | 1.71 (43.43) 1.50 (38.10) | 1.34 (34.04) 1.49 (37.85) | TL16082-102 TL16082-101 |
|
|
|
|
Dimensions specified in inches (millimeters) and pounds (kilograms).
Note: Variables may not represent the same dimensions on all series numbers.
| Material/ Finish | Ultimate Load, lbs. | Weight, lbs. | A inches | B inches | Part Number |
| Shear Pin: 17-4PH CRES/Passivate Link, Handle, Side Plate, Trigger and Pivot: 302 -304 CRES/Passivate Guide Block: 2024 -T351 Aluminum Alloy/ Anodize Springs: 17-7PH CRES/Passivate |
10,000 (4,536) Double Shear | .50 (.226) Max. | 1.34 (34.04) | 1.77 (44.96) 1.26 (32.04) | TL16119-102 TL16119-103 |
| Links: 7075 -T651 Aluminum Alloy/ Anodize Housing, Actuator, and Bolt Guides: 356 -T6 Aluminum Alloy/Anodize Latch Bolts and Actuator Shafts: 17-4PH CRES/Passivate Springs: 17-4PH Spring Temper CRES/Passivate |
– | 2.50 (1.133) Max. | – | – | TL20050-101 *Basic Part Number. Consult Camloc/Ram Engineering for specific Part Number based on length of 4 links. |
| Series | Dimensions | Material/ Finish |
|---|---|---|
|
|
|
 |
||
 |
||
|
||
 |
||
 |
Dimensions specified in inches (millimeters) and pounds (kilograms).
Note: Variables may not represent the same dimensions on all series numbers.