PORTING TOOL CARBIDE TIPPED PS10047 (MA2110-EN2602) PORT
| BROACH TOOL NUMBER | PORT DASH NO. PS10047 MA2110 EN2602 | A THREAD MA1370 -4h6h | B HEX REF | C HEX REF | D DIA MAX REF | E ±0.75 | THRUST BEARING 3 | CUTTER NUMBER 1 | |
| PART NO | QTY | ||||||||
| RFMOPB077HDB | -077 | MJ6 X 1 | 10.0 | 4.0 | 25.0 | 78.20 | NTA-512 | 4 | RFMOPB077-HDB5 |
| RFMOPB098HDB | -098 | MJ8 X 1 | 13.0 | 5.5 | 27.5 | 85.70 | NTA-613 | 4 | RFMOPB098-HDB5 |
| RFMOPB125HDB | -125 | MJ10 X 1 | 17.0 | 7.0 | 31.0 | 98.80 | NTA-815 | 4 | RFMOPB125-HDB5 |
| RFMOPB136HDB | -136 | MJ12 X 1.25 | 19.0 | 8.0 | 34.0 | 104.30 | NTA-916 | 4 | RFMOPB136-HDB5 |
| RFMOPB153HDB | -153 | MJ14 X 1.5 | 22.0 | 10.0 | 38.0 | 113.65 | NTA-1018 | 4 | RFMOPB153-HDB5 |
| RFMOPB170HDB | -170 | MJ16 X 1.5 | 24.0 | 12.0 | 40.7 | 127.70 | NTA-1220 | 4 | RFMOPB170-HDB5 |
| RFMOPB192HDB | -192 | MJ18 X 15 | 27.0 | 13.0 | 45.0 | 131.70 | NTA-1423 | 3 | RFMOPB192-HDB5 |
| RFMOPB214HDB | -214 | MJ20 X 1.5 | 30.0 | 15.0 | 49.0 | 142.40 | FTA-2542 | 3 | RFMOPB214-HDB5 |
| RFMOPB231HDB | -231 | MJ22 X 1.5 | 32.0 | 17.0 | 51.3 | 147.15 | NTA-1625 | 3 | RFMOPB231-HDB5 |
| RFMOPB253HDB | -253 | MJ24 X 1.5 | 36.0 | 19.0 | 57.0 | 164.40 | NTA-1828 | 3 | RFMOPB253-HDB5 |
| RFMOPB295HDB | -295 | MJ27 X 1.5 | 41.0 | 20.0 | 62.7 | 177.65 | NTA-2031 | 3 | RFMOPB295-HDB5 |
| RFMOPB320HDB | -320 | MJ30 X 1.5 | 46.0 | 24.0 | 69.3 | 191.00 | FTA-3552 | 3 | RFMOPB320-HDB5 |
| RFMOPB350HDB | -350 | MJ33 X 1.5 | 50.0 | 25.0 | 75.0 | 206.15 | NTA-2435 | 3 | RFMOPB350-HDB5 |
NOTES:UNLESSOTHERWISESPECIFIED
1.Two extra cutters are provided with each tool. Replacement or spare cutters may be purchased individually.
2. Noted runout and the controlled minor diameter of the port will result in a permissible maximum runout of 0.23
between the serration major diameter and the controlled thread minor diameter after broaching.
3. Bearings manufactured by The Torrington Company, CT, USA.
APPLICATION: This broach tool is designed to produce serrations in the counterbore of PS10047 ports. The tool will
broach into aluminum, magnesium and other materials with a maximum hardness of 40 HRC.
METHOD: Screw the “A” thread end of the stud into the threaded hole of the port until the stud is seated against the
20° taper in the port. Turn the hex nut in a clockwise direction to broach serrations. Broaching is complete when the
tool body contacts the port surface. Using hex at end of the stud turn stud in a counterclockwise direction to retract
cutter from port.