BROACH TOOL, NON-IMPACT PS10035 PORT SERRATIONS (FOR SOFT MATERIALS)
| BROACH TOOL NUMBER | A DIA +.002 -.004 | NUMBER OF TEETH | B DIA ±.002 | C DIA ±.010 | TO PRODUCE SERRATIONS FOR PORT NUMBER |
| RFOPB5002ED3 | .411 | 24 | .312 | .109 | PS10035-02 |
| RFOPB5003ED3 | .480 | 26 | .375 | .125 | PS10035-03 |
| RFOPB5004ED3 | .526 | 30 | .375 | .125 | PS10035-04 |
| RFOPB5005ED3 | .637 | 36 | .500 | .156 | PS10035-05 |
| RFOPB5006ED3 | .712 | 36 | .500 | .156 | PS10035-06 |
| RFOPB5008ED3 | .826 | 40 | .500 | .156 | PS10035-08 |
| RFOPB5010ED3 | 1.054 | 38 | .500 | .156 | PS10035-10 |
| RFOPB5012ED3 | 1.184 | 40 | .500 | .156 | PS10035-12 |
| RFOPB5014ED3 | 1.356 | 50 | .500 | .156 | PS10035-14 |
| RFOPB5016ED3 | 1.473 | 36 | .500 | .156 | PS10035-16 |
| RFOPB5020ED3 | 1.797 | 56 | .500 | .156 | PS10035-20 |
| RFOPB5024ED3 | 2.047 | 81 | .500 | .156 | PS10035-24 |
| RFOPB5032ED3 | 2.563 | 102 | .500 | .156 | PS10035-32 |
NOTES: UNLESS OTHERWISE SPECIFIED
1. MATERIAL: COPPER TUNGSTEN, with option of alloy steel
2. When using this tool, the machine should be set to produce a burn which is .002 to .003 larger on the
diameter than “A” Dia. This will allow the lockring to fit into the serration produced with about .004 to .005
clearance. The applicable lockring may be used to gage the port serration.
CAUTION: Care must be taken when machining to provide the following requirements: A maximum runout of .009 must
be maintained between serration major dia and controlled minor dia (specified in Rosan PS10035 port specification)
after machining.