Features:
- Low silhouette design.
- Attractive appearance.
- Mechanisms concealed under handle.
95L Series
Strength: 100 pounds ultimate;50 pounds working.
Standard Version
Bottom View 95L01
Low Cost Version
Bottom View 95L07
| Handle Material & Finish1 | Latch Version | Latch Part No. | A Max. |
| Steel (Cadmium Plated, Clear Chromate) | Standard Version (supplied with helically coiled spring element) | 95L01-1-1AB | .29 |
| Steel (Chrome Plated) | 95L01-1-1AG | ||
| Steel (Nickel Plated) | 95L01-1-1AJ | ||
| Steel (Cadmium Plated, Clear Chromate) | Low Cost Version (supplied with wire form spring element) | 95L07-1-1AB | .33 |
| Steel (Chrome Plated) | 95L07-1-1AG | ||
| Steel (Nickel Plated) | 95L07-1-1AJ | ||
| Steel (Cadmium Plated, Black Polyurethane Paint) | 95L07-1-1AO | ||
| Stainless Steel (Passivated) | 95L07-1-1BC |
Weight Per Piece (lbs.): Standard Version: .029, Low Cost Version: .024
Note: 1. All other latch parts are steel (cadmium plated with clear chromate).
Strike
| Material | Strike . | A |
| Steel (Cadmium Plated, Clear Chromate) | 95H01-1-1AB | .103 .097 |
| 95H07-1-1AB | .134 .129 | |
| Stainless Steel (Passivated) | 95H07-1-1BC |
Weight Per Piece (lbs.): .002
96L Series
Strength: 150 pounds ultimate;100 pounds working.
Specifications:
Material: See tables above.
Strength: 95L: 100 pounds ultimate; 50 pounds working.
96L: 150 pounds ultimate; 100 pounds working.
| Material | Handle Finish1 | Standard Latch2 Part No. |
| Steel | Cadmium Plated, Clear Chromate | 96L01-1-1AB |
| Steel | Chromium Plated | 96L01-1-1AG |
| Steel | Bright Nickel Plated | 96L01-1-1AJ |
Weight Per Piece (lbs.): .056
Notes: 1. All other latch parts are cadmium plated with clear chromate.
2. 96L standard latch is supplied with helically coiled spring
Strike
| Material | Strike. Part No |
| Steel, (Cadmium Plated, Clear Chromate) | 96H01-1-1AB |
Weight Per Piece (lbs.): .005
Operating Action: Over-Center.
Adjustment: Self-compensating spring elements(s).
Take-up: 1.00 inches minimum.
Panel Preparation and Installation Data.
| Latch Series | Strike Series | A Dia. | Rivet Dia. | B TYP. | Approximate Clamping Load |
| 95L01 | 95H01 | .103 .097 | 3/32 | .530 | 18 Pounds |
| .590 | 26 Pounds | ||||
| 95L07 | 95H07 | .134 .129 | 1/8 | .580 | N/A |
| 96L01 | 96H01 | .103 .097 | 3/32 | 1.000 | 20 Pounds |
| 1.060 | 30 Pounds |
1. Locate and form four “A” Diameter holes.
Note: “B” typical will obtain approximate clamping loads as indicated in table.
2. Attach with rivets (size listed in table).