Delron Inserts 601 Series Flared Thru-Rivet
Style Selection
Table 1
| Size | Rivet Size | A Hole Dia. | B Sleeve Dia. | C Head Dia. | D C’Sink Dia | FlarE Dia. e |
| 0 | 8 (3/32) | .103 | .250 | .375 | .192 | .148 |
| 1 | 12 (1/8) | .133 | .312 | .500 | .233 | .174 |
| 2 | 15 (5/32) | .168 | .375 | .562 | .295 | .225 |
| 3 | 18 (3/16) | .194 | .375 | .562 | .362 | .225 |
| 4 | 25 (1/4) | .256 | .500 | .687 | .486 | .290 |
| 5 | 31 (5/16) | .318 | .562 | .750 | .574 | .356 |
| 6 | 37 (3/8) | .381 | .625 | .875 | * | .418 |
*Available upon request.
Part Number Selection
Consult Rosán for availability of optional materials, finishes and sizes.
Example:
Note:
- Tolerances, unless otherwise specified: .xxx ± .010; Angles ± 2°.
Typical Assembly
Typical Series 601, Flared Thru-Rivet; Body and Sleeve assembly installed in honeycomb sandwich panel. Both top and
bottom panel skins are gripped between body and flared sleeve of insert for maximum structural strength.
Note: For installation and tooling information, see pages 68
and 69.
Body and Sleeve Dash Number Selection
Sleeve Dash Number
Round down to the nearest hundredth of an inch of the panel core thickness (See Fig. 1).
Example: .489 Core Thickness, drop last digit to read -48.
Body Dash Number
Select Body Number from Table 2 according to Overall Panel Thickness.
Example: Overall Panel Thickness of .524 = F52 Body Number.
Fig. 1
Notes:
- Flush Head styles are not recommended for panel skin thicknesses greater than .030.
- Non-Flush Head styles are to be used only with minimum panel skin thickness of .030
Table 2
| Body | T Panelss |
| F25 | .250-2.50 |
| F26 | .260-.269 |
| F27 | .270-.279 |
| F28 | .280-.289 |
| F29 | .290-.299 |
| F30 | .300-.309 |
| F31 | .310-.319 |
| F32 | .320-.329 |
| F33 | .330-.339 |
| F34 | .340-.349 |
| F35 | .350-.359 |
| F36 | .360-.369 |
| F37 | .370-.379 |
| F38 | .380-.389 |
| F39 | .390-.399 |
| F40 | .400-.409 |
| F41 | .410-.419 |
| F42 | .420-.429 |
| F43 | .430-.439 |
| F44 | .440-.449 |
| F45 | .450-.459 |
| F46 | .460-.469 |
| F47 | .470-.479 |
| F48 | .480-.489 |
| F49 | .490-.499 |
| F50 | .500-.509 |
| Body | Panel Thickness |
| F51 | .510-.519 |
| F52 | .520-.529 |
| F53 | .530-.539 |
| F54 | .540-.549 |
| F55 | .550-.559 |
| F56 | .560-.569 |
| F57 | .570-.579 |
| F58 | .580-.589 |
| F59 | .590-.599 |
| F60 | .600-.609 |
| F61 | .610-.619 |
| F62 | .620-.629 |
| F63 | .630-.639 |
| F64 | .640-.649 |
| F65 | .650-.659 |
| F66 | .660-.669 |
| F67 | .670-.679 |
| F68 | .680-.689 |
| F69 | .690-.699 |
| F70 | .700-.709 |
| F71 | .710-.719 |
| F72 | .720-.729 |
| F73 | .730-.739 |
| F74 | .740-.749 |
| F75 | .750-.759 |
| F76 | .760-.769 |
| Body | Panel |
| F77 | .770-.779 |
| F78 | .780-.789 |
| F79 | .790-.799 |
| F80 | .800-.809 |
| F81 | .810-.819 |
| F82 | .820-.829 |
| F83 | .830-.839 |
| F84 | .840-.849 |
| F85 | .850-.859 |
| F86 | .860-.869 |
| F87 | .870-.879 |
| F88 | .880-.889 |
| F89 | .890-.899 |
| F90 | .900-.909 |
| F91 | .910-.919 |
| F92 | .920-.929 |
| F93 | .930-.939 |
| F94 | .940-.949 |
| F95 | .950-.959 |
| F96 | .960-.969 |
| F97 | .970-.979 |
| F98 | .980-.989 |
| F99 | .990-.999 |
| F100 | 1.000-1.009 |
| F101 | 1.010-1.019 |
| F102 | 1.020-1.029 |