Features:
- Simple rugged design.
- Can be used with or without a strike.
- High lift tab available for easy opening.
- Wide variety of bases and drawhooks.
- Optional lift spring.
Strength: 200 pounds ultimate; 100 pounds working.
| Description | Material | Part No. | Weight Per Piece (lbs.) |
| Regular Base | Steel (Zinc Plated) | 20L01-1-1AA | 0.12 |
| Steel (Chrome Plated) | 20L01-1-1AC | ||
| Lift Spring Installed | Steel (Chrome Plated) | 20L06-1-2AB | 0.13 |
| Regular Base with High Lift Tab | Steel (Zinc Plated) | 20L28-1-1AA | 0.11 |
| Steel (Zinc Plated except oil coated base) | 20L28-1-1AB | ||
| Steel (Chrome Plated) | 20L28-1-1AC |
Adjustable Base
| Description | Material | Part No. | Weight Per Piece (lbs.) |
| Adjustable Base | Steel (Zinc Plated) | 20L01-3-1AA | 0.11 |
| Adjustable Base with High Lift Tab | Steel (Zinc Plated) | 20L28-6-1AA | |
| Steel (Zinc Plated except oil coated base) | 20L28-6-1AB | ||
| Steel (Chrome Plated) | 20L28-6-1AC |
Radiused Base
| Description | Material | Part No. | Weight Per Piece (lbs.) |
| Radiused Base | Steel (Chrome Plated) | 20L01-4-3AC | 0.11 |
| Radiused Base with High Lift Tab | Steel (Zinc Plated) | 20L28-4-2AA | |
| Steel (Zinc Plated except oil coated base) | 20L28-4-2AB | ||
| Steel (Chrome Plated) | 20L28-4-2AC |
Weld-on Base (Narrow Width)
| Description | Material | Part No. | Weight Per Piece (lbs.) |
| Lift Spring Installed. | Drawhook: Steel (Zinc Plated) Base: Steel (Oil Coated) | 20L06-1-1AA | 0.13 |
| Regular. | 20L06-2-1AA | 0.12 |
Specifications:
Material: See tables.
Strength: 200 pounds ultimate;100 pounds working.
Operating Action: Over-Center.
Adjustment: Self-compensating spring-steel drawhook.
(20L01-3-1AA also has slotted base.)
Take-up: .500 inches minimum.
Weld-on Base (Regular Width)
| Description | Material | Part No. | Weight Per Piece (lbs.) |
| Supplied With Weld Nibs | Drawhook: Steel (Zinc Plated) Base: Steel (Oil Coated) | 20L01-2-1AB | 0.11 |
| Supplied Without
Weld Nibs |
20L01-5-1AB | ||
| High Lift Tab With Weld Nibs | 20L28-2-1AB | 0.11 | |
| High Lift Tab Without Weld Nibs | 20L28-5-1AB |
| Description | Material | Part No. | Weight Per Piece (lbs.) |
| Short Drawhook. Supplied Without Weld Nibs. | Drawhook: Steel (Zinc Plated) Base: Steel (Oil Coated) | 20L15-1-1AA | 0.1 |
See strike information on following page.
Strike
Top View
Side View
| Description | Material | Part No. |
| Supplied With Holes For Mechanical Attachment | Steel (Zinc Plated) | 20L02-1-1AA |
| Supplied With Weld Nibs | Steel (Oil Coated) | 20L02-2-1AA |
Panel Preparation and Installation Data
Installation Using Strike.
Mechanical Attachment:
1.Locate and form holes for latch and strike.
(a) Strike can be eliminated by slotting panel or hooking drawhook over an
(See Illustration.)
(b) Adjust “B” or “C” dimension as applicable to obtain desired clamping load. Dimensions referenced typically allow
latch to lock up with no clamping load applied.
2.Attach latch with No. 12 bolts or 7/32 inch diameter rivets. Attach strike with No. 5 machine screws or
1/8 inch diameter rivets. (Fasteners are not supplied.)
Weld Attachment:
Locate latch and strike (see notes 1a and 1b above), and weld in place.
Installation in Slotted Panel or Over Edge.
| Latch Style | Latch Assembly Part No. | |||
| Regular Base | 20L01-1-1AA | |||
| 20L01-1-1AC | ||||
| 20L01-1-2AB | ||||
| 20L28-1-1AA | ||||
| 20L28-1-1AB | ||||
| 20L28-1-1AC | ||||
| Adjustable Base | 20L01-3-1AA | |||
| 20L28-6-1AA | ||||
| 20L28-6-1AB | ||||
| 20L28-6-1AC | ||||
| Radiused Base | 20L01-4-3AC | See Part Drawing | rowspan=”8″ 1.692 | rowspan=”8″ 0.970 |
| 20L28-4-2AA | ||||
| 20L28-4-2AB | ||||
| 20L28-4-2AC | ||||
| Weld-on-Base | 20L01-2-1AB | N/A | ||
| 20L01-5-1AB | ||||
| 20L28-2-1AB | ||||
| 20L28-5-1AB | ||||
| 20L06-1-1AA | N/A | 2.122 | 1.380 | |
| 20L06-2-1AA | ||||
| 20L15-1-1AA | 1.106 | 0.364 |