Description |
Part No. |
A REF. |
B DIA. REF. |
C REF. |
Strike |
Attachment Fastener |
37L15 Series |
37L14 Series |
Screw Size REF. |
Rivet Dia. REF. |
D TYP. |
E TYP. |
D TYP. |
E TYP. |
Tool Operated |
37L52-1-1AA |
-- |
-- |
-- |
2.86 |
-- |
-- |
2.30 |
Weld |
Weld |
37L52-1-2AA |
37L52-1-2BB |
37L52-2-2BB |
Two-Position Draw Bolt, Short Length |
37L22-1-1AC |
2.86
See Note |
2.30
See Note |
37L22-2-1AC |
1.000 |
.250 |
.875 |
-- |
4.24
See Note |
3.68
See Note |
-- |
1/4 |
1/4 |
Secondary Lock |
37L33-1-1AA |
1.500 |
.190 |
1.531 |
4.29 |
3.73 |
2.30 |
No. 10 |
3/16 |
37L33-1-1AB |
37L33-1-4AB |
37L33-4-1AB |
4.38 |
2.95 |
Two-Position Draw Bolt, Regular Length |
37L1-1 |
-- |
-- |
-- |
3.82
See Note |
-- |
-- |
3.26
See Note |
Weld |
Weld |
37L1-2 |
37L1-3 |
37L1-5C |
Short Handle |
37L11-1 |
2.86 |
-- |
-- |
2.30 |
37L11-2 |
37L11-1B |
37L11-7 |
3.42 |
-- |
-- |
2.86 |
37L11-8 |
37L25-1-1AA |
1.000 |
.250 |
.875 |
-- |
4.24 |
3.68 |
-- |
1/4 |
1/4 |
Note: Dimension shown applies when drawbolt is assembled in the maximum mechanical advantage hole. Subtract .37 from the dimension if drawbolt is assembled in the maximum take-up hole.
Mechanical Attachment
- Locate latch and form 4 "B" Diameter holes.
- Attach latch with bolts or rivets (see table, not supplied).
- Locate strike as required and weld in place.
Weld Attachment
Locate latch and strike as required and weld in place. (See illustrations on following page for correct weld seams.)
| 
