MATERIALS AND FINISHES, INSERT AND LOCKRING
INSERT PART NUMBER [7] | LOCKRING PART NUMBER [8] REF | A INTERNAL THREAD CLASS-3B | B EXTERNAL THREAD CLASS-3A | C DIA ± .005 | D ± .005 | E ± .005 | F ± .015 | |
* RJ1706SB8 | RL33SB7 | .2500-28UNJF | .4375-20 UNF | .510 | .176 | .276 | .500 | |
RJ1707SB8 | RL38SB7 | .3125-24UNJF | .5000-20UNF | .588 | .176 | .276 | .500 | |
RJ1708SB8 | RL47SB8 | .3750-24UNJF | .6250-18UNF | .729 | .191 | .302 | .500 | |
RJ1709SB9 | RL47SB8 | .4375-20UNJF | .6250-18UNF | .729 | .191 | .302 | .560 | |
RJ1710SB9 | RL56SB8 | .5000-20UNJF | .7500-16UNF | .870 | .191 | .316 | .560 | |
RJ1711SB9 | RL56SB8 | .5625-18UNJF | .7500-16UNF | .870 | .191 | .316 | .560 | |
RJ1713SB10 | RL72SB8 | .7500-16UNJF | 1.0000-14UNF | 1.120 | .191 | .334 | .620 |
NOTES: UNLESS OTHERWISE SPECIFIED
- MATERIAL: 1117 steel per ASTM A108.
NOTE: These parts are available in other materials. Refer to page 27.
- FINISH: Cadmium plate per QQ-P-416, TY II, CL3.
- Inserts are installed per page
[4] Internal configuration meets the requirements of MS33649 except RJ1706SB8.
- Refer to RF9500 Series Catalog for 3000 PSI External Sealing Configuration.
- Properly installed with designer’s choice of packing ring these fasteners will effect an external seal of
150 For O-ring information refer to page 31.
[7] RJ1700 Series supersedes R1700 Series due to AND10050 being superseded by MS33649.
[8] The hydraulic insert is used in conjunction with a thin series lockring. Refer to page
41 and 42.